Loading ...
Loading ...
Loading ...
9
UTILITY BRUSHES
NOTE: The Nylon Utility Brushes and Brass Utility Brush are all attached in the same
manner. A Nylon Utility Brush is illustrated in FIGURE 6 as an example.
1. Align selected Utility Brush with Jet Nozzle. Guide key inside of Utility Brush should line up
with key slot on Jet Nozzle tip (FIGURE 6-A).
2. Firmly press Utility Brush onto Jet Nozzle (FIGURE 6-B).
CAUTION: Make sure Utility Brush is pushed as far as possible onto Jet Nozzle tip to
ensure that it is seated securely. This will eliminate steam leaks and prevent Utility
Brush from being forced off of Jet Nozzle by steam pressure.
SCRUB TOOL
1. Place Scrub Tool over tip of Jet Nozzle, and rmly press it on to
Jet Nozzle as far as possible (FIGURE 7). This will help to prevent
steam leakage.
2. To remove Scrub Tool, simply grip it rmly and pull it off of Jet Nozzle.
ORDERING ACCESSORIES & PARTS
Replacement accessories and parts for your Multi-Purpose Steam Cleaner (model SF-370) may
be ordered through our web site:
www.steamfast.com
You may also contact Consumer Service directly:
[email protected] or 1-800-711-6617
FIGURE 7
FIGURE 6
KEY SLOT
GUIDE KEY
6-A 6-B
Loading ...
Loading ...
Loading ...