Loading ...
Loading ...
Loading ...
Page 4
SAFETY INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
READ ALL INSTRUCTIONS
BEFORE USING (THIS POWER
TOOL)
WARNING
Read and
understand all instructions before using
this product. Failure to follow all
instructions listed below may result in
electric shock, re, and/or serious
personal injury. When using an electrical
appliance, basic precautions should
always be followed, including the
following:
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks that may ignite the dust
or fumes.
• Do not allow children or untrained
individuals to use this unit.
• Don’t expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
• Do not handle battery or tool with wet
hands.
• Never allow children to operate the
equipment. Never allow adults to operate
the equipment without proper instruction.
• Always wear safety glasses with side
shields that are marked to comply with
ANSI Z87.1. Everyday glasses have only
impact resistant lenses. They are NOT
safety glasses. Following this rule will
reduce the risk of eye injury. Use face
mask if operation is dusty.
• Don’t use in the rain. Store indoors.
• Do not operate in poor lighting.
• Keep all parts of your body away from any
moving part.
• Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to battery pack, picking up
or carrying the appliance. Carrying the
appliance with your nger on the switch or
energizing appliance that have the switch
on invites accidents.
• Do not force tool. Use the correct tool
for your application. The correct tool will
do the job better and safer at the rate for
which it is designed.
• Do not operate the equipment while bare
foot or when wearing sandals or similar
lightweight footwear. Wear protective
footwear that will protect your feet and
improve your footing on slippery surfaces.
• Keep firm footing and balance. Do not
overreach. Overreaching can result in loss
of balance.
• Check Damaged Parts – Before further use
of the appliance, a guard or other part that
is damaged should be carefully checked to
determine that it will operate properly and
perform its intended function.
• Check for alignment of moving parts,
binding of moving parts, breakage of parts,
mounting and any other condition that
may affect its operation. A guard or other
part that is damaged should, be properly
repaired or replaced by an authorized
service center unless indicated elsewhere
in this manual.
• Keep guards in place and in working order.
• Keep hands and feet away from cutting
area.
• Do not allow to be used as a toy. Close
attention is necessary when used by or
near children.
• Do not use tool if switch does not turn it on
or off. Any tool that cannot be controlled
with the switch is dangerous and must be
repaired.
• Keep all bystanders, children, and pets at
least 50 ft. away.
• Do not operate this unit when you are tired,
ill, or under the inuence of alcohol, drugs,
or medication.
• Use only Masterforce Batteries: BAB726,
BAB727, BAB728, BAB729 or other BAB
series.
• Use only Masterforce Charger: CAB809 or
other CAB series.
• Do not put any object into openings. Do not
use with any opening blocked; keep openings
free.
• Check the work area before each use.
Remove all objects such as rocks, broken
glass, nails, wire, or string which can be
thrown or become entangled in the machine.
Loading ...
Loading ...
Loading ...