Loading ...
Loading ...
Loading ...
5. HEALTH AND SAFETY INFORMATION
Have this tool repaired by a qualified person. This tool is designed to confirm to the relevant
international and local standards and as such should be maintained and repaired by someone
qualified; using only original parts supplied by the manufacturer: This will ensure the tool remains
safe to use.
5.1 GENERAL SAFETY INSTRUCTIONS FOR CHAINSAW USE
Chainsaws pose a very significant health and safety risk, even to careful and informed operators,
for example, the use of a chainsaw in the workplace requires extensive training and certification.
The dangers of using and applying a chainsaw should not be taken lightly. Seek guidance, training
or employ a professional to carry out the task if uncertain or nervous of the potential risks and
dangers involved. WARNING: Danger of death.
Personal Protective Equipment (PPE)
– Due to the nature and ferocity of a petrol driven
chainsaw, no PPE equipment can provide 100%
protection against chainsaw cuts.
– Equipment specifically designed for use with a chainsaw shall be worn, consisting of;
• Safety helmet (EN 397).
• Mesh visor (EN 1731).
• Hearing protection (EN 352).
• Gloves (EN 381-7) with protective guard on back of left hand.
• Leg protection (EN 381-5).
• Non-slip boots (EN 345-2).
• High visibility jacket.
Leg protection is achieved with a chain clogging material designed to stop the chain before it
penetrates fully through and into flesh.
The gloves, boots and leg protection should be marked
with the symbol (right) and indicate the chain speed to
which they have been tested.
Preparation
– Before use inspect the guide bar grooves for distortion, the guide bar rail for cracks, the nose
sprocket teeth condition, chain tension and condition, drive sprocket condition and operation
and operation of the chain brake.
– Never operate the chainsaw alone in case of emergency. Have an assistant in
visual/communicative range.
– Ensure the site is assessed for risk potential and a safe working distance is marked to prevent
bystanders entering.
– In case of accident, ensure means of contact with emergency services are possible and
adequate information is available to facilitate an urgent recovery.
– Always carry a basic first aid kit containing large wound dressings.
– Identify all services (e.g. gas, water, electric, phone etc.), particularly overhead before felling
commences.
– Ensure a distance of at least twice the tree height is observed from all obstacles and dangers.
– Keep bystanders a minimum of 10M away and all access points into the work area marked
accordingly.
– Tree felling must only be carried out by a single individual and only after the danger zones and
escape routes have been identified and cleared.
– Do not fell when wind conditions may influence/control the direction.
- 6 -
10. MAINTENANCE
- 27 -
0.6mm
FIG. 35
FIG. 36
10.5 SPARK PLUG - FIGS. 35 & 36
– The spark plug should be replaced annually or if the
chainsaw is experiencing starting problems.
– Remove the top cover to reveal the spark plug.
Carefully pull off the spark plug HT lead. Using the
box spanner supplied unscrew the plug.
– If the electrodes are excessively soiled or are very
worn, replace with a suitable equivalent plug.
Note: Ensure the spark plug has the correct heat range
for this machine. Excessive soiling can be due to an
incorrect ratio of oil to fuel.
Note: The spark plug gap should be 0.6mm. Use feeler
gauges to check the gap.
Note: Do not carry out repairs on the machine if
you are not qualified to do so with the exemption of
the items listed in this maintenance section.
Danger: In order to maintain the original safety
features, do not make any changes to the machine.
In case of repairs, use only genuine spare parts.
– Before each use check that there are no loose or
damaged parts, cracks and signs of wear.
– Have damaged parts replaced by an authorised
service agent before using the machine.
10.6 CLEANING, TRANSPORT &
STORAGE
– Note: Stop engine and allow to cool before cleaning, transporting or storing the chainsaw.
– Clean the unit after each use. Only use a mild detergent and sponge on plastic surfaces. Do not
use aggressive cleaning agents.
– Separation of fuel can lead to acids forming during storage. In order to avoid engine problems
empty fuel system if storing for longer than 30 days. Empty the fuel tank, start the engine and
allow to run until it stops. Ensure fresh fuel is used next season. Never use engine or
carburettor cleaning products in the fuel tank as permanent damage may occur.
– Do not store the machine or fuel in an enclosed area where fuel vapours can reach sparks or
flame from switches, heaters, electric motors etc.
– Store in a safe area out of the reach of children.
Loading ...
Loading ...
Loading ...