Loading ...
Loading ...
Loading ...
6. TECHNICAL DESCRIPTION
- 10 -
- 23 -
x
Warning:
*Fuel mixing bottle is designed to allow the user to easily mix two-stroke oil with petrol.
It is not designed to store or transport petrol/petrol oil mix.
The chemical and physical properties of petrol/petrol oil mix are such that the seals on this bottle
may leak. Do not use this bottle for storage or transportation.
Contact Draper Tools for suitable storage containers.
9. OPERATING INSTRUCTIONS
FIG. 25
FIG. 26
FIG. 27
9.11 CROSS CUTTING/BUCKING
- FIGS. 25 - 27
Refer to general safety instructions for preparatory and
specific warnings.
– Regardless of the supporting method, when cross
cutting the compression face of the timber must be
initially cut followed by a secondary cut from the
other side to meet completing the cut. The initial cut
should be one third the diameter and the secondary
cut two thirds.
– Incorrectly assessing the tension can result in the
chain pinching or the timber splintering.
– For smaller logs always employ the use of a log saw
stand/horse. Smaller logs must be secured before
cutting commences as the chain speed can cause
the log to move and possible kick up.
– Use the spiked bumper to obtain a firm grip and
leverage while performing all cuts.
9.12 SAW CHAIN
– The chainsaw is designed for cutting timber only.
Do not allow the chain to come into contact with the
ground as dirt and soil will dull the chain almost
immediately. Hard wood will also rapidly dull the
chain.
– When the chain is properly sharpened, work will not
be tiring, the cutting yield is high, and there is no
abnormal wear on the mechanical parts or the bar.
TENSION
FACE
2
1
COMPRESSION
FACE
TENSION
FACE
1
2
COMPRESSION
FACE
Loading ...
Loading ...
Loading ...