Loading ...
Loading ...
Loading ...
25English
Installation Instructions
Installing the Flexible Conduit
1. Prepare the conduit cord (Figure 1).
2. Install the conduit cord (Figure 2).
through the body of the strain relief, and fasten the ring, then reinstall the bracket.
Installing a 3-wire Conduit
• Aluminum building wire may be used but must be rated for the correct amperage and voltage.
Connect wires according to Step 4 depending on the number of wires.
• Wire used, location/enclosure of splices, etc., must follow good wiring practices and local
codes.
1. Loosen the three lower screws on the terminal block.
2. Insert the white/neutral bare wire tip through the
bottom-center block opening. (Some models: the wire
inserted through the ground-strap opening into the
bottom-center block opening.)
3. Insert the left and right wire tips into their respective
block openings.
4. Tighten the screws to 35 – 50 in.-lbs.(Any tighter may
damage the wires.)
Loading ...
Loading ...
Loading ...