Masterforce VF408 OPERATOR’S MANUAL

Loading ...

Page 13

5. Turn the motor on by f lipping the switch to

the ‘I’ ON position. (fig. 6)

Fig. 6

6. After use, flip the switch to the ‘O’ OFF

position and unplug the power cord from

the outlet. (fig. 7 & 8)

Fig. 7 Fig. 8

7. Empty the collection tank into a suitable

receptacle or drain. (fig. 9)

Fig. 9

8. To rewind the cord, hold on to the plug and

press the cord rewind button. Do not allow

plug to whip when rewinding. (fig. 10)

Fig. 10

IMPORTANT!

When vacuuming large

quantities of liquids, do not immerse the nozzle

completely in the liquid; leave a gap at the tip

of the nozzle opening to allow air inflow. The

machine is fitted with a f loat valve that stops the

suction action when the collection tank reaches

its maximum capacity. You will notice an

increase in motor speed. When this happens,

turn off the machine, disconnect from power

supply, and empty the liquid into a suitable

receptacle or drain. To continue vacuuming,

refit the power head to the collection tank.

After wet vacuuming, turn the machine off and

remove plug from power supply. To prevent the

risk of possible mildew, empty the collection

tank, clean, and dry the inside and outside of

the collection tank. Remove the foam wet filter

and allow it to air dry before storage.

REMEMBER!

The foam wet filter must be

removed after wet vacuuming, and a cartridge

filter must be installed before dry vacuuming

again.

LIQUID VACUUM OPERATION

Loading ...

Masterforce VF408 4 Gallon 5 Peak HP Wet/Dry Shop Vacuum