Masterforce VF408 OPERATOR’S MANUAL

Loading ...

Page 10

DRY VACUUMING

WARNING:

BE SURE TO READ,

UNDERSTAND, AND APPLY INFORMATION,

ENTITLED ‘SAFETY INSTRUCTIONS &

WARNINGS’. DO NOT VACUUM IN AREAS

WITH FLAMMABLE GASES, VAPORS,

OR EXPLOSIVE DUSTS IN THE AIR.

FLAMMABLE GASES OR VAPORS INCLUDE

BUT ARE NOT LIMITED TO: LIGHTER

FLUID, SOLVENT TYPE CLEANERS, OIL-

BASED PAINTS, GASOLINE, ALCOHOL OR

AEROSOL SPRAYS. EXPLOSIVE DUSTS

INCLUDE BUT ARE NOT LIMITED TO: COAL,

MAGNESIUM, GRAIN, OR GUN POWDER. TO

REDUCE THE RISK OF HEALTH HAZARDS

FROM VAPORS OR DUST, DO NOT VACUUM

TOXIC MATERIALS.

1. Verify that the power cord is disconnected

from the outlet. (fig. 1)

Fig. 1

2. In order to prepare your vacuum for dry

vacuuming, verify that the cartridge filter is

securely mounted. Make sure the filter is

pushed in until it stops against the power

head. (fig. 2) (Your Wet/Dry Vac comes with

the cartridge filter pre-installed, if not see

page 15 for installation instructions.)

Fig. 2

3. Place filter retainer on top of cartridge filter

and tighten by turning the retainer handle

clockwise. (fig. 3)

Fig. 3

4. Optional: For improved dust filtration, fit dust

collection bag lange onto the inlet port,

taking care not to damage the bag. Dust bag

sold separately. (fig. 4)

Fig. 4

5. Place the power head back on the collection

tank, aligning the top section with the

latches, and lock into place. (fig. 5)

Fig. 5

DRY VACUUM OPERATION

Loading ...

Masterforce VF408 4 Gallon 5 Peak HP Wet/Dry Shop Vacuum