Loading ...
Loading ...
Loading ...
11
Dual Beer Kegerator/Beverage Cooler
www.insigniaproducts.com
Attaching the guard rail
• Insert the guard rail into the holes on the top of the kegerator.
Installing the draft arm assembly
1 Remove the cabinet plug from the top of the kegerator.
2 Align the beer gasket with the holes on the top of the cabinet.
3 Pass both the wing nut and the beer tube (both are attached to the
draft arm assembly) through the hole on the worktop until the draft
arm assembly is resting on the top of the cabinet.
4 Align the holes in the draft arm with the holes in the gasket, then
attach the draft arm to the worktop with the four screws provided.
5 Attach the black plastic beer tap handles to the top of the faucets,
tightening by hand. Hold the silver ring snug so it does not move.
Note
If there is a small drip after you pour a beverage, you may have
tightened the beer tap handle too much. If so, unscrew the silver
snug ring one turn, then retighten the beer tap handle.
Beer tap handle
Draft arm assembly
Wing nut and beer tube
Beer gasket screws
Beer gasket
Loading ...
Loading ...
Loading ...