Loading ...
Loading ...
Loading ...
Wash Cycle TableWash Cycle Table
NOTE:NOTE:
Detergent
Cycle Selection
Information
Program
Running
time(min)
Energy
(Kwh)
Water
(l)
Description
of Cycle
Rinse
Aid
Turning On the ApplianceTurning On the Appliance
Starting a wash cycle...
Draw out the basket(see the section entitled Loading the Dishwasher ).
Pour in the detergent (see the section entitled Salt,
Detergent and Rinse Aid ).
Insert the plug into the socket. The power supply is 220-240
VAC
50 HZ, the specification of the socket is 10 A 250 VAC.
Make sure that the water supply is turned on to full pressure.
When you press the Start/Reset button to pause during washing,
the program light will stop blinking and the dishwasher will mooing
every minute unless you press the Start/Reset button to start.
For normally soiled loads,
such as pots, plates,
glasses and lightly
soiled pans.
For heaviest soiled crockery,
and normally soiled pots
pans dishes etc with dried
on soiling.
Use for rinsing dishes and
glasses that will not be wash
right away.
For lightly soiled crockery
and glass.
150
185
160
13
100
1.25
0.82
1.35
0.01
0.7
13
8
13
3
10.5
Pre-wash(45 )
Wash (60 )
Rinse
Rinse
Rinse (65 )
Drying
Pre-wash
Wash (45 )
Rinse (65 )
Drying
Wash(45 )
Rinse(65 )
Drying
Pre-wash(45 )
Wash (65 )
Rinse
Rinse
Rinse (70 )
Drying
(*EN5 0242)
NOTE:NOTE:
*EN 5 0242 : This programme is the test cycle. The information for comparability test
in accordance with EN 50242, as follows:
Capacity: 8 setting
Rinse aid setting: 6
The power consumption of off-mode is 0.45W
left-on mode is 0.49W
This is standard programme,
it is suitable to clean normally
soiled tableware and it is the
most efficient programme in
terms of its combined energy
and water consumption for
that type of tableware.
---
Pre-wash
A shorter wash for lightly soiled
loads that do not need drying.
30
0.35
7
Wash (35 )
Rinse
Rinse (40 )
18 g
Pre-wash
14
main
20g
20g
20g
20g
Loading ...
Loading ...
Loading ...