Loading ...
Loading ...
Loading ...
Page 16
POCKET CUTTING (FIG. 14)
1. Remove the battery pack from the tool.
2. Adjust the bevel setting to 0° and tighten
the bevel locking knob.
3. Set the blade to the correct blade
cutting depth.
4. Replace the battery pack.
5. Use the blade-guard lever to swing the
lower blade guard up.
6. Hold the lower blade guard in place with
the blade-guard lever.
7. Rest the front of the base shoe against
the workpiece, with the rear of the base
shoe raised, making sure that the blade
does not touch the workpiece.
8. Press the lock-off button and depress
the trigger switch to start the saw.
9. Allow the blade to reach full speed,
then lower the saw into the material and
guide the saw into the workpiece and
make the cut.
10. Release the trigger switch and allow the
blade to come to a complete stop.
11. Lift the saw from the workpiece.
WARNING:
Always adjust the
bevel setting to 0° before making a pocket
cut. Attempting a pocket cut at any other
setting can result in loss of control of the
saw and possible serious injury.
WARNING:
Always cut in a forward
direction when pocket cutting. Cutting in
the reverse direction could cause the saw
to climb up on the workpiece and kick
back toward the operator.
OPERATION
FIG. 14
Bevel-
adjustment
Lever
Lower Blade-
guard Lever
Loading ...
Loading ...
Loading ...