Loading ...
Loading ...
Loading ...
Page 12
ASSEMBLY
HOOK (FIG. 8)
Your tool is equipped with a convenient hook
for hanging your tool. To use, simply lift up
hook until it snaps into the open position.
When not in use for hanging, always lower
hook until it snaps into the closed position.
FIG. 8
Hook
LED WORKLIGHT (FIG. 7)
The circular saw is equipped with a LED
worklight, which will illuminate when the
trigger switch is depressed. This provides
additional light on the surface of the
workpiece for operation in lower-light areas.
The light will stay on for 10 seconds after the
trigger has been released.
NOTICE: In the event that the saw
becomes overloaded or overheated,
the saw will stop and the LED will blink.
Remove the saw from the workpiece,
allow it cool, and then resume work.
FIG. 7
LED
Worklight
OPERATION
TURNING THE SAW
ON AND OFF (FIG. 9)
1. To turn the saw ON, press the lock-off
button, and then squeeze the trigger
switch.
2. To turn the saw OFF, release the trigger
switch and allow the blade to come to a
complete stop.
WARNING:
The blade should
reach full speed before it comes into
contact with the workpiece.
FIG. 9
Lock-off
Button
Trigger
Switch
Loading ...
Loading ...
Loading ...