Loading ...
Loading ...
Loading ...
Page 11
OPERATION
B) EMPTY THE CYCLONIC DUST BOX (SEE
FIG E2 E3)
For more efcient operation, empty the cyclonic
dust box every 5-10mins. This will permit the air
to ow through the box better.
To empty the box, press the latching lever in
and pull off the box. Then press the button at
the rear of the box to open it, and shake out
dust.
Fig. E2
Fig. E3
3. OPERATING THE ON/OFF SWITCH (SEE
FIG. F1, F2)
Slide the on/off switch to the position marked ”I”
to start the machine.
Slide it to the position marked “O” to stop it.
Fig. F1
Fig. F2
4. VARIABLE SPEED CONTROL (SEE FIG. G)
With the variable speed control, the required
speed can be selected (also while running).
The required speed is dependent on the
material and is to be determined by a practical
trial.
After longer periods of working at low speed,
allow the machine to cool down by running it
for approx. 3 minutes at maximum speed with
no load.
Loading ...
Loading ...
Loading ...