Loading ...
Loading ...
Loading ...
EN - 11
IMPORTANT Always remove the battery
(par. 7.2.2) and fit the blade guard whenever
the machine is unused or left unattended.
7. ROUTINE MAINTENANCE
7.1 GENERAL INFORMATION
The safety regulations to follow
are described in chap. 2. Strictly
comply with these instructions to
avoid serious risks or hazards.
Before conducting any inspections,
cleaning or maintenance/adjustment
interventions on the machine:
• Stop the machine;
• Wait until the chain is stationary;
• Remove the battery from its housing;
• Apply the bar cover, except when working
directly on the chain or bar itself.
• Wait until the motor is suciently cold;
• Read the relevant instructions;
• Use suitable clothing, protective
gloves and goggles;
•
•
•
IMPORTANT Any maintenance and
adjustment operations not described in
this manual must be carried out by your
dealer or Authorised Service Centre.
7.2 BATTERY
7.2.1
a.
– cutting trees and branches
b.
–
– adopting a cutting technique
•
•
•
7.2.2
1. Press the retainer tab in the
(Fig. 10.B)
2.
3.
indicated on the rating plate.
4.
NOTE The battery is equipped with a guard
that inhibits recharging if the environmental
temperature is not between 0 and +45 °C.
NOTE The battery can be recharged at any
time, even partially, with no risk of damaging it.
7.2.3
1.
2.
3.
7.3 TOPPING UP THE CHAIN OIL TANK
NOTE The following symbol is found
on the chain oil tank cap (fig. 25.A) :
Loading ...
Loading ...
Loading ...