Loading ...
Loading ...
Loading ...
EN - 7
comply with these instructions to
avoid serious risks or hazards.
Unpacking and completing the assembly
should be done on a at and stable surface,
with enough space for machine handling
and its packaging, always making use of
suitable equipment. Do not use the machine
until all the indications provided in the
"ASSEMBLY" section have been carried out.
4.1 ASSEMBLY COMPONENTS
4.1.1
1.
2.
box, including these instructions.
3.
4.
5.
4.2 ASSEMBLY OF THE GUIDE
BAR AND TOOTHED CHAIN
Always wear heavy-duty gloves when
handling the bar and chain. Mount the
bar and chain very carefully so as not to
impair the safety and eciency of the
machine. If in doubt, contact your dealer.
Perform all operations after
removing the battery.
1.
access the drive pinion and bar seat.
2.
the stud bolt (Fig. 4.B) in the groove
3. Mount the chain around the drive pinion (Fig.
5.A) and along the bar guide, being careful
the chain runs
4.
5.
6.
achieve the desired tension (Fig. 7).
7. Raise the bar and tighten the
4.2.1 chain tension
5. CONTROLS
5.1 THROTTLE CONTROL LEVER
The throttle control lever
start the chain (Fig. 9.A).
The throttle control lever (Fig. 9.A) can
5.2 THROTTLE BRAKE BUTTON
throttle control lever to be used (Fig. 9.A).
6. USING THE MACHINE
The safety regulations to follow
are described in chap. 2. Strictly
comply with these instructions to
avoid serious risks or hazards.
IMPORTANT For instructions
regarding the motor and the battery (if
supplied), read the relevant manuals.
6.1 PREPARATION
6.1.1
Loading ...
Loading ...
Loading ...