User Manual Remington NE3150D Nose, Brow & Ear Trimmer, Red

Documents for Remington NE3150D

The following documents are available:
User Manual Photos
NE3150D photo
WARNING
To reduce the risk of burns, fire, electric shock or injury
to persons:
This appliance is for household use only.
Close supervision is necessary when this appliance is used
by, on, or near children or individuals with special needs or
certain disabilities.
Use this appliance only for its intended use as described
in this manual. Do not use attachments not recommended
by manufacturer.
Never drop or insert any object into any of the appliance's
openings.
Do not use outdoors or operate where aerosol (spray)
products are being used, or where oxygen is being
administered.
Always store the appliance in a moisture-free area. Do not
store it in temperatures exceeding 140°F (60°C).
Do not use this appliance with damaged or broken cutters,
as injury may occur.
Always remember to turn on the trimmer before you insert
it into your nose or ear to avoid painfully snagging hairs.
Never insert the trimmer more than 1/4" (6mm) into your
nose or ear. Foreign objects should not come into contact
with your ear drum.
Battery cautions
Use of non-alkaline batteries will impair the unit's operating
performance.
Battery should not be left in the unit if the unit is not in use
for long periods.
To prevent battery corrosion, the unit should be stored in a
dry environment.
Dead batteries should be removed immediately and disposed
of properly.
Do not use rechargeable batteries with this appliance.
The lower voltage in rechargeable batteries impairs the
performance of the cutting unit.
Changing the Attachment Heads (if applicable)
Some models have interchangeable attachments. You may
want to use the rotary head to trim nose hairs, the linear head
for ear and eyebrow hairs, and the linear for sideburns and
necklines.
To change heads:
1. Turn the trimmer off.
2. Detach cutting head by turning it counterclockwise to the
unlocked position and pulling it off.
3. Once the previous head is removed, attach the other head by
placing it on top of the unit and turning it clockwise to the
locked position.
Turning on your trimmer:
The on/off switch is integrated into the battery cap.
1. Rotate the battery cap clockwise to turn on.
2. To turn off, simply rotate the battery cap, counterclockwise,
back to the off position.
Use and Care
When using an electrical appliance, basic precautions should
always be observed, including the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS APPLIANCE.
Inserting the Battery
All Remington
®
Nose and Ear trimmers run on one "AA"
ALKALINE battery.
1. To open the battery compartment, turn the base of the unit
approximately 1/4 inch counterclockwise and pull it off.
2. Insert the battery into the unit, positive end first.
3. Replace the base and turn it 1/4 inch
clockwise to lock it into place.
NE 3000 Series
IMPORTANT SAFETY
INSTRUCTIONS
Use and Care Guide
Register Your New Product Today!
By registering your new Remington
®
product you will receive these important
benefits: Proof of ownership • Product protection • Product registration
• Special offers Register online at: RemingtonProducts.com
Cleaning Your Trimmer
Your nose and ear trimmer is designed to give you years of com-
fortable use. To ensure that you get optimal performance from
your trimmer, follow these simple cleaning and lubricating tips:
After each use, brush or blow accumulated hair from the
cutting unit.
Rinsing Your Trimmer
Your Remington
®
trimmer can be rinsed with cool or warm
water. Just hold the unit's head under the faucet - it is not
necessary to remove the head first. Do not use hot water.
If the trimmer needs additional cleaning, the cutting head
can be removed by turning it 1/4 inch counterclockwise and
pulling it off. Then blow out the accumulated hair or rinses it
more thoroughly under running water.
Afterward, shake excess water from the cutter head, making
sure that all parts are held together.
Replace the head in the same position as it was removed,
turning it 1/4 inch clockwise until it locks into place
Lubricating the cutters
After rinsing the unit, apply a drop or two of mineral oil or
baby oil to the cutting teeth.
Don’t apply too much oil, or it may spray.
Finally, point the trimmer down and away from you, and turn
it on. This spreads the oil evenly and expels any excess.
NOSE, EAR
& BROW
TRIMMER
Loading ...