Loading ...
Loading ...
Loading ...
Page 41
Installation and Operation Manual - Escape 1500-I
ENGLISH
3. Align the holes of the faceplate extension (X) with the holes in the faceplate panels and
screw them using bolts (P) and nuts (O) provided.
K
P
O
4. Center the insert into the fireplace opening.
If necessary, adjust the height of the insert using the levelling bolts (T) on each side of
the insert until the faceplate is properly seated on the floor of the hearth extension.
5. Align the notch in the faceplate extension with the bolt (Q) welded to the air jacket located and
slide the faceplate assembly just over the bolt’s head and washer (R). Then push towards the
fireplace.
6. Once the faceplate is in place, secure the assembly by tightening nuts (S) using a 7/16"
(11 mm) open end wrench.
Q
R
S
T
Loading ...
Loading ...
Loading ...