Loading ...
Loading ...
Loading ...
(ITEMS NOT SUPPLIED)
Star-head screwdriver
(ITEMS SUPPLIED)
8mm Hex key (1 pc)
Arbour nut wrench (1 pc)
UNPACKING
YOU WILL NEED
• Carefully lift the tile saw from the carton and place on a level work surface.
• Inspect the tile saw carefully to make sure no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily operated the tile saw.
• The tile saw is factory set for accurate cutting. After assembling it, check for accuracy. If shipping has inuenced the
settings, refer to specic procedures explained in this manual.
WARNING: Do not use this tile saw if any parts on the Loose Parts List are already assembled to your tile saw
when you unpack it. Parts on this list are not assembled to the tile saw by the manufacturer and require customer installation.
Use of a tile saw that may have been improperly assembled could result in serious personal injury.
WARNING: If any parts are damaged or missing do not operate this tile saw until the parts are replaced. Use of
this tile saw with damaged or missing parts could result in serious personal injury.
WARNING: Do not attempt to modify this tile saw or create accessories not recommended for use with this tile
saw. Any such alteration or modication is misuse and could result in a hazardous condition leading to possible serious
personal injury.
WARNING: Do not connect to power supply until assembly is complete. Failure to comply could result in accidental
starting and possible serious personal injury.
Page 11
ASSEMBLY
FIG. 3A
INSTALLING STAND ASSEMBLY TO
WATER TRAY FRAME ASSEMBLY
(Fig. 3A-3J)
• Place the water tray frame assembly upside down.
• Attach upper stand assembly (R) with water tray frame
assembly (B) with hex bolts M8 x 85 (Y), at spacers (X),
spacers (W) and lock nuts M8 (Z).
Y
13mm,16mm Open-end wrench or adjustment wrench
R
X
R
Z
W
B
Loading ...
Loading ...
Loading ...