Loading ...
Loading ...
Loading ...
EN
W415-3006 / A / 05.27.21
29
8.0 finishing
ENSURE NO GLASS IS PLACED ON THE IGNITION PORTION OF
THE BURNER, DIFFICULTIES IN LIGHTING MAY RESULT.
ENSURE NO ROCK IS PLACED ON THE IGNITION PORTION OF
THE BURNER, DIFFICULTIES IN LIGHTING MAY RESULT.
8.1 glass ember installation
!
WARNING
• Do not use the appliance without the glass embers in place.
• Glass embers may have sharp edges. Wear safety glasses and gloves when handling. Do not change or
substitute the glass ember material provided with this appliance. If replacing, use only replacment glass embers
available from your local authorized dealer/distributor.
• Glass embers may have a fine oil residue that needs to be cleaned prior to installation. Clean the glass with
mild dish soap, drain, rinse thoroughly, and dry before installating.
1. Carefully pour the glass embers onto the appliance ember tray as shown.
2. Spread the glass embers over the tray and burner. The distribution of clear glass over the burner will influence
flame height.
3. The glass embers must cover the mesh area of the burner tray while ensuring no glass is placed on the ignition
portion of the burner as illustrated below.
8.2 rock kit installation (optional)
!
WARNING
• Real rocks must not be used in this appliance. Heat will cause them to explode.
Replace the refractory rocks on top of the glass ember bed and around the burner tray as desired, making sure not
to cover any burner ports or the ignition portion of the burner.
Loading ...
Loading ...
Loading ...