Loading ...
Loading ...
Loading ...
15
Care and Cleaning
RANGE HOOD
WARNING: Failure to maintain basic standards of care and cleaning of the range hood will increase
the risk of re.
The range hood should be cleaned (regularly internally and externally) to preserve its appearance and performance.
Do: Do Not:
- Always clean in the direction of the grain
(original
polish lines).
- Clean the range hood periodically with hot,
soapy water and a clean cotton cloth.
- Always rinse well with clean water two or
three times after cleaning. Wipe completely
dry with a soft non-abrasive cloth.
- After cleaning, you may polish with a non-
abrasive stainless steel polish or cleaner.
Always rub lightly and with the grain
- Ensure that the venting system is free of
debris, if you have one.
- Do not use corrosive or abrasive detergents,
steel wool, or scouring pads. These will scratch
and damage the stainless steel surface.
- Do not use any products containing chloride,
uoride, iodide, or bromide on this product, as
they will deteriorate the surface rapidly.
- Do not allow cleaning compounds, salt
solutions, disinfectants, or bleaches to remain
in contact with the product for extended
periods of time.
- Do not allow any deposits to remain for long
periods of time on the range hood. Rinse with
water immediately and wipe dry with a clean
cloth.
- Do not let plaster dust or any other
construction residue enter the hood. During
construction or renovation, cover the hood.
- Combustible products used for cleaning such
as acetone, alcohol, ether, or benzol are highly
explosive and should never be used close to a
range or stove.
FILTER
The lter tted by the factory is intended to lter out residue and grease from cooking. You do not need to replace them
on a regular basis, but you should keep them clean.
Do: Do Not:
- Clean the lter once a month using non-
abrasive detergents, either by hand or in the
dishwasher. When using a dishwasher, set
the dishwasher to a low temperature and a
short cycle setting. The lter may become
discoloured in a dishwasher, but this does
not affect its performance.
- Allow lters to completely dry before re-
installing them in the range hood.
- Do not allow oil to accumulate over
more than 80% of the lter surface. Oil
accumulations may drip oil onto the range.
- Do not wash charcoal lter. The charcoal
lter should be replaced when it is covered
in grease and has reached its maximum
absorbancy.
Loading ...
Loading ...
Loading ...