Loading ...
Loading ...
Loading ...
11
Installation (continued)
INSTALLING THE RANGE HOOD
DANGER: Turn off the power circuit breaker or the
power switch on the junction box before installing
this unit. Touching circuitry inside the range hood
while it is energized will result in death or serious
injury.
DANGER: If installing this unit over a gas range,
turn off the gas at the source before installing or
servicing this unit.
- Lift the range hood (A) up under the cabinet to
determine its nal position. Mark the location of the
four keyhole mounting slots (1) on the underside of
the cabinet.
- Set the range hood (A) aside on a protective
surface.
- Drill four pilot holes in the locations that you
marked.
- Screw the four long tapping screws (AA) into the
pilot holes. Do not tighten the screws all the way –
leave the screw heads about 7 mm (0.28 in) from
the cabinet surface.
- Lift the range hood (A) into position, feeding the
power cable and the electrical wires through the
power access opening. Allow some slack in the
cable and wires so that the appliance can be
moved if servicing is ever necessary.
- Position the range hood (A) so the large end (2) of
the keyhole mounting slots (1) are over the screws
(AA). Then push the range hood (A) toward the
wall so the screws (AA) are in the neck (3) of the
keyhole slots. Tighten the screws (AA). Ensure
that the range hood (A) is securely fastened to the
cabinet before releasing it.
- If applicable, test the damper blade to ensure it
rotates up and down freely.
- If applicable, connect the duct work to the range
hood (A). Seal the joints with duct tape to ensure
an airtight t.
FINAL STEP
- Reconnect the power supply cable and wires to the
electrical supply. Turn the power on and ensure that
the lights and fan are operating correctly.
AA
AA
A
1
1
AA
1
2
3
Loading ...
Loading ...
Loading ...