Loading ...
Loading ...
Loading ...
25
EN
Electrical hazard
• The grill must not be immersed in water or other liquids. Risk of electric shock.
• The grill must not be blasted with water or other liquids. Risk of electric shock.
• Therefore do not use the unit near sources of moisture such as a sink.
• Do not use the device outdoors.
• Connect the device to a properly installed outlet with a voltage corresponding to
that listed in “Technical Specications”.
• Ensure that the power outlet is easily accessible so that you can quickly unplug the
power cord if necessary.
• Do not use the high temperature grill if it is damaged, if the heating element cracks,
if the power cord or plug are damaged, if the appliance has been dropped or there
is any other damage to the unit.
• Completely unwind the power cord before each use. Make sure that the power
cord is not damaged by sharp edges or hot objects.
• Unplug the device from the outlet after every use, when not using the grill, before
cleaning or storing, if a malfunction occurs during the operation and during
thunderstorms.
• Always pull the plug, not the cord.
• Do not make any modications to the device or to the power cord.
• Have repairs carried out only by a specialist workshop. Do not use an extension
cord. If the power cable of the appliance is damaged, it must be replaced by the
manufacturer, the manufacturer’s customer service or a specialist workshop in order
to avoid a hazard.
• The device must not be connected to an external timer or a remote-controlled
socket.
• The unit must be operated via a residual current line which has a tripping current of
not more than 30 mA. If you are unsure, consult a qualied electrician.
If an unexpected power cut occurs during operation, do the following:
1. Remove the food from the grilling area.
2. Do not touch the housing and make sure that no other objects come into contact
with it. Without active cooling, the housing can become very hot due to the
residual heat of the heater.
3. If the power interruption is short, the fan will continue to run automatically after
restoring the power supply. In this case, let the fan continue until the appliance
has cooled down completely.
4. Otherwise, unplug the appliance from the wall outlet, ensure sufcient room
ventilation and do not leave the appliance unattended until it has cooled down
completely.
Loading ...
Loading ...
Loading ...