Loading ...
Loading ...
Loading ...
Operating Instructions
1. Set the pressure switch(1) to the OFF
position (Fig. E).
Start Up
1
FIG. E
FIG. D
2. Turn the air pressure regulator knob
counter-clockwise until it stops(Fig. F).
3. Attach hose and accessories (FIG. G).
FIG. G
Hot compressor
surfaces could result in serious injury.
Allow compressor to cool before
touching.
High pressure air
could result in death or serious injury.
Never operate above maximum
operating pressure of the spray
gun or tool.
WARNING:
WARNING:
Notice
If the pump has been transported or
turned upside down (even partially),
allow the pump to sit in a normal,
upright position (FIG. A) for
approximately 10 minutes before starting.
Check Safety Valve
Before starting compressor, pull the
ring on the safety valve to make sure
that the safety valve operates freely.
If the valve is stuck or does not
operate smoothly, contact a trained
service technician(Fig. D).
Page 11
FIG. F
FIG. C
2
3
1
Loading ...
Loading ...
Loading ...