Figure 1
Xtreme Garage
®
Laser Parker
INSTALLATION INSTRUCTIONS
1. Using thumb, slide the mounting plate away from the bottom
of the unit. (Figure 1)
2. Install mounting plate on the garage’s ceiling using included
screws with anchors. (Note: Make sure the laser parker will
be visible when the garage door is open.)
3. The laser parker can be powered by the 110V AC / 9V DC
adapter (included), or by a standard 9V DC battery (sold
separately). For battery operation: open the battery
compartment and insert a new 9V DC battery.
4. Slide the laser parking back onto the mounting plate.
5. Park your car in your desired spot. Now direct the laser light to a target spot on the
vehicle visible from the driver’s position.
6. As you enter the garage the proximity sensor will turn on the laser.
When your target spot is illuminated by the laser, you are on your spot!!
SKU 425-1019
