403TSFTIE7 User Manual

Loading ...

Dimensions (millimetres)

Model Specication

403TSFTiE7: 3.0kW convector heater with electronic controls and

turbo boost

Electrical Connection

WARNING: THIS APPLIANCE MUST BE EARTHED

The use of an extension lead or multi-plug adaptor is not adviced when connecting this product to the mains. Connection through these

deviceS could lead to risk of overloading, overheating and even re at the extention lead or adaptor due to inadequate connection quality

This heater must be used on an AC (~) supply only and the voltage marked on the heater must correspond to the supply voltage. This heater

is tted with a rewirable plug incorporating a 13 amp fuse. In the event of replacing the fuse in the plug supplied, a 13 amp fuse approved by

ASTA to BS 1362 must be used. If any other type of plug is used, a 15 amp fuse must be tted in the plug, the adaptor, or at the distribution

board.

IMPORTANT: If the plug is not suitable for your socket, the 13 amp plug should be removed. Before wiring the appropriate plug, please note

that the wires in this mains lead are coloured in accordance with the following code:

GREEN AND YELLOW: EARTH

BLUE: NEUTRAL

BROWN: LIVE

Connect the GREEN AND YELLOW wire to the terminal marked ‘E’ or by the earth symbol, or coloured GREEN or GREEN AND YELLOW.

Connect the BROWN wire to the terminal marked ‘L’ or coloured RED. Connect the BLUE wire to the terminal marked ‘N’ or coloured BLACK

Technical Data

Model Identier(s) 403TSFTIE7

Heat output (kW)

Nominal heat output Pnom 3 kW

Minimum heat output (indicative) Pmin 2 kW

Maximum continuous heat output Pmax,C 3 kW

Auxillary electricity Consumption

At nominal heat ourput elmax 0.00 kW

At minimum heat output elmmin 0.00 kW

In standby mode elSB 0.00 kW

Tubo Fan Y

Loading ...

User Manual - Page 3