Loading ...
Loading ...
Loading ...
4
• The appliance must not be used if it has been dropped, if
it appears to be damaged, if it is leaking or is not working
correctly.
• Do not attempt to dismantle your appliance: take it to an
approved service center to avoid any danger.
• If the power cord or steam cord of your appliance is damaged,
it must be replaced by an approved service centre in order to
avoid any danger.
• Before storing the appliance, once it is unplugged, please wait
until it has cooled down completely (around 1 hour).
• All accessories, consumables and removable parts must be bought only from an approved service centre.
• For your safety, this appliance conforms to all applicable regulations (Low Voltage, Electromagnetic Compatibility and
Environment Directives, etc.).
• Your appliance is an electrical appliance: it must be used under normal conditions of use.
• It is equipped with 2 safety systems(depending on model):
– a valve to prevent the build-up of pressure, which allows excess steam to escape in the event of the appliance
malfunctioning,
– a thermal fuse to prevent overheating.
• Always plug your appliance:
– into a mains circuit with voltage between 220 V and 240 V (Alternating current only),
– into a socket outlet with an earth connection.
Faulty connection can cause irreparable damage to the appliance and will invalidate your guarantee.
• If you are using an extension cord, ensure that it is correctly rated (16A) with an earth connection and is fully extended.
• Fully unwind the power cord before plugging it into an earthed plug socket.
• Never touch the power cord or steam cord with the soleplate of the appliance. Do not leave the power cord or steam
cords close to or in contact with sources of heat or sharp edges.
• The water in the appliance may still be hot and cause burns even after 2 hours of cooling down. Handle the appliance
with care when the cap/collector is removed, particularly when you are emptying it.
• Your appliance emits steam that may cause burns.
– Handle the iron with care, particularly when using the vertical steam function.
– Never steam clothing when it is worn by a person, always steam it on a hanger.
– Never iron in a seated position with your legs below the ironing board.
– Never direct the steam towards people or animals.
• The first time the appliance is used, there may be some reject of particles, fumes and smell but this is not harmful.
• Never immerse your appliance in water or any other liquid. Never place it under tap water.
• Careful during the assembly of the product & the board to pinch risks(depending on model)
• Never place the flat iron on the ironing board, always use the iron rest. Similarly, never place the separated base on
the ironing board(depending on model)
Important notice for appliances ≥ 2200W only :
Under unfavorable mains conditions, phenomena like transient voltage drops or lighting fluctuations can happen.
Therefore, it is recommended that the iron is connected to a power supply system with a maximum impedance of 0,29
Ω. If necessary, the user can ask the public power supply company for the system impedance at the interface point.
What water should I use?
• This appliance has been designed to be used with untreated tap water. If your water is very hard, (hardness above 30°F,
or 17°dH or 21°e) use a mixture of 50% tap water and 50% distilled water. In some seaside regions, salt content might
be high. In that case, use only water bottle, with low mineral level.
• They are different type of softened water, and most of them can be used in your appliance. However, some of them,
especially the one with chemical components, like salt, might occur white or brown runs. If you face this type of issue,
we recommend you to use non-treated tap water or bottled water.
Loading ...
Loading ...
Loading ...