Loading ...
Loading ...
Loading ...
Page 6
UNPACKING YOUR WET/DRY VACUUM
& GENERAL ASSEMBLY
1. Verify that the battery pack is not installed.
2. Undo the latches.
3. Remove the contents from inside the
collection tank; make sure you have all
contents as listed on page 5.
INSTALLING & REMOVING THE HOSE
1. Pull one end of the hose out of the hose
storage (Fig. 1).
Fig. 1
2. Connect the other end of the hose to the
vacuum port; make sure it is secure.
3. This wet/dry vacuum has blowing
capabilities. To use as a blower, connect
the hose to the blower port (Fig. 2).
Fig. 2
INSTALLING & REMOVING ACCESSORIES
1. To remove the extension wands, pull each
wand from its storage slot at the bottom of
the vac (Fig. 3).
Fig. 3
2. Choose the desired accessories and
extension wands and push onto the hose
(Fig. 4 & 5).
Fig. 4
Fig. 5
Loading ...
Loading ...
Loading ...