Loading ...
Loading ...
Loading ...
4
Design Features
illus.-2.1
Power Connector
The power connector allows for quick connec-
tion and disconnection of the amplifier’s Re-
mote, power and ground source. The power and
ground are set-screw wire connectors and will
accommodate 4 AWG. The remote is a set-screw
wire connector and will accommodate 8 AWG.
Phase Switch
Allows you to select the output phase of
the amplifier between 0° and 180°.
Input Level
Set the Input Level switch to match the outputs of your source unit.
(LO - RCA or HI - Speaker Level)
Auto Turn On
Three different automatic turn-on modes can be selected;
REM(+12V), DC Offset, and Audio.
Variable Crossover
Is a built-in 12dB/octave Butterworth filter with
a crossover point variable from 50Hz to 200Hz.
Punch Bass
This is an adjustable Bass control adjustment vari-
able from 0dB to +12dB @ 45Hz.
Power/Protect LED
Power LED illuminates green
when the unit is turned on.
Protect LED illuminates red
if a short circuit or to low of
an impedance is detected at
the speaker connections.
The amplifier will automati-
cally shut down if this oc-
curs.
Remote Punch Level
When connected, the “Gain Control” is linked
and allows you to remotely control the output
level of the amplifier from the dash or center
console.
Audio Input
The RCA/Speaker Harness utilizes either speaker
level (high-level) or RCA (low-level) inputs.
Gain Control
The input gain control is preset to match
the output of most source units.
GAIN
MIN MAX
X-OVER
50Hz
0dB 12dB
PWR
PRO
FUSE
REMOTE AUDIO INPUT
FUSE
200Hz
BASS
BOOST
INPUT
LEVEL
AUTO
TURN ON
PHASE
LO REM
DC OFFSET
AUDIO
HI
180˚
0˚
Loading ...
Loading ...
Loading ...