Loading ...
Loading ...
Loading ...
Page 17
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Tool does not
work.
Low battery capacity. Charge the battery pack.
String trimmer
stops while
cutting.
The motor shaft or
trimmer head is bound
with grass.
Stop the trimmer, remove the battery,
and remove the grass from the motor
shaft and trimmer head.
The motor is overloaded Move the trimmer head to cut the grass
no more than 8 in. of length in a single
cut. Remove the trimmer head from the
grass and restart the tool.
The battery pack or string
trimmer is too hot.
Release the trigger switch, wait for the
tool to cool down, and then start the
tool again.
Trimmer head will
not advance line.
The motor shaft or
trimmer head is bound
with grass.
Stop the trimmer, remove the battery,
and clean the motor shaft and trimmer
head.
There is not enough line
on the spool.
Remove the battery and replace the
cutting line; follow the section “Line
Replacement” in this manual.
Loading ...
Loading ...