Loading ...
Loading ...
Loading ...
CARTON CONTENTS
SAFETY INSTRUCTIONS
EXTENSION CORDS
Keep the extension
cord clear of the working area. Position
the cord so that it will not get caught on
lumber, tools or other obstructions while
you are working with a power tool.
Check extension
cords before each use. If damaged
replace immediately. Never use a tool with
a damaged cord since touching the
damaged area could cause electrical
shock, resulting in serious injury.
The following items are provided in the
shipping box:
A. Grinder (not shown)
B. Eyeshield assembly, left
C. Eyeshield assembly, right
D. Wheel dresser
E. Spark arrestor, left
F. Spark arrestor, right
G. Tool rest support, left
Use a proper extension cord. Only use cords
listed by Underwriters Laboratories (UL).
Other extension cords can cause a drop in
line voltage, resulting in a loss of power and
overheating of tool. When operating a power
tool outdoors, use an outdoor extension cord
marked “W-A” or “W”. These cords are rated
for outdoor use and reduce the risk of electric
shock.
H. Tool rest support, right
I. Carriage bolt M6 x 12 (2)
J. Pan head screws w/ washe
K. Flat washer M6 (4)
L. Tool rest, left
M. Tool rest, right
N. Eyeshield knob (2)
O. Tool rest knob (2)
P. Light Bulb (not shown)
FIG. C
Eyeshield assembly, right
Spark arrestor, right
Tool rest support, left
Eyeshield knob (2)
Flat Washer M6 (4)
Pan head screws w/ washers M5 x 10 (4)
Page 8
Loading ...
Loading ...
Loading ...