Masterforce 2410818 5-Amp Corded 8" Variable Speed Bench Grinder

User Manual - Page 8

For 2410818.

PDF File Manual, 24 pages, Read Online | Download pdf file

2410818 photo
Loading ...
Loading ...
Loading ...
IMPROPER ELECTRICAL CONNECTION of
the equipment grounding conductor can result
in risk of electric shock. The conductor with
the green insulation (with or without yellow
stripes) is the equipment grounding
conductor. DO NOT connect the equipment
grounding conductor to a live terminal if repair
or replacement of the electric cord or plug is
necessary.
CHECKwithaqualiedelectricianorservice
personnel if you do not completely
understand the grounding instructions, or if
you are not sure the tool is properly grounded.
USE ONLY A 3-WIRE EXTENSION CORD
THAT HAS A 3-PRONG GROUNDING
PLUG AND A 3-POLE RECEPTACLE THAT
ACCEPTS THE TOOL’S PLUG. REPLACE A
DAMAGED OR WORN CORD
IMMEDIATELY.
This tool is intended for use on a circuit that
has an electrical receptacle as shown in
FIGURE A. FIGURE A shows a 3-wire
electrical plug and electrical receptacle that
has a grounding conductor. If a properly
grounded electrical receptacle is not
available, an adapter as shown in FIGURE B
can be used to temporarily connect this plug
to a 2-contact ungrounded receptacle. The
adapter has a rigid lug extending from it that
MUST be connected to a permanent earth
ground, such as a properly grounded
receptacle box. THIS ADAPTER IS
PROHIBITED IN CANADA.
17. ADDITIONAL INFORMATION regarding
the safe and proper operation of this product
is available from:
• Power Tool Institute
1300 Summer Avenue
Cleveland, OH 44115-2851
www.powertoolinstitute.org
• National Safety Council
1121 Spring Lake Drive
Itasca, IL 60143-3201
• American National Standards Institute
25 West 43rd Street, 4th Floor
New York, NY 10036
www.ansi.org
• ANSI 01.1 Safety Requirements for
Woodworking Machines and the
U.S. Department of Labor regulations
www.osha.gov
18. SAVE THESE INSTRUCTIONS. Refer
to them frequently and use them to instruct
others.
ELECTRICAL SAFETY
THIS TOOL MUST BE GROUNDED WHILE
IN USE TO PROTECT THE OPERATOR
FROM ELECTRIC SHOCK.
IN THE EVENT OF A MALFUNCTION OR
BREAKDOWN, grounding provides the path
of least resistance for electric current and
reduces the risk of electric shock. This tool
is equipped with an electric cord that has
an equipment grounding conductor and a
grounding plug. The plug MUST be plugged
into a matching electrical receptacle that is
properly installed and grounded in
accordance with ALL local codes and
ordinances.
DO NOT MODIFY THE PLUG PROVIDED.
Ifitwillnotttheelectricalreceptacle,have
the proper electrical receptacle installed by a
qualiedelectrician.
SAFETY INSTRUCTIONS
FIG. A
FIG. B
Page 7
Loading ...
Loading ...
Loading ...