Loading ...
Loading ...
Loading ...
SPECIFICATIONS
CARTON CONTENTS
UNPACKING AND CHECKING CONTENTS
(Fig. C)
This Bench Grinder will require a minimal
amount of assembly.
1. Remove parts from all of the cartons and
lay them on a clean work surface.
2. Remove any protective materials and
coatings from all of the parts and the bench
grinder. The protective coatings can be
removed by spraying WD-40 on them and
wipingitowithasoftcloth.Thismayneedto
be redone several times before all of the
protective coatings are removed completely.
CAUTION: DO NOT use acetone, gasoline or
lacquer thinner to remove any protective
coatings.
3. Compare the items to Figure C; verify that
all items are accounted for before discarding
the shipping box.
If any parts are
missing, do not attempt to plug in the power
cord and turn “ON” the Bench Grinder. The
Bench Grinder can only be turned “ON” after
all the parts have been obtained and installed
correctly.
MOTOR POWER
MOTOR RPM
GRINDING WHEEL SIZE
GRINDING WHEEL GRIT
LAMP
TOOL RESTS
3/4HP, 120v, 5a, 60Hz
2000 to 3400 RPM (variable)
8” x 1”, 5/8” Bore
60 Grit
120v, 40 Watt or Less,Type R20
Left and Right
EYE SHIELDS Clear Plastic, Left and Right
SPARKS ARRESTORS Left and Right
QUENCH TRAY 3.4” W x 2.8” L x .63” D
Page 9
Loading ...
Loading ...
Loading ...