Loading ...
Loading ...
Loading ...
6
Locate the steam generator horizontally on the
iron rest plate of your ironing board (if large
enough) or on a heat resistant stand at the same
height as your ironing board or below it. Always
ensure the steam generator is on a firm surface
when ironing.
WARNING: Do not use the product on a
surface which could be damaged by heat or
steam such as a worktop or a polished wood
surface.
If in doubt, contact Morphy Richards.
Remove any protective covers from the soleplate
(6) and the base unit (17).
Unwind and straighten the power
(14) and steam
supply cords (1).
Remove the antiscale cartridge
(15) from the
antiscale cartridge drawer (16) and immerse in
water for 5 minutes for better filtration. Insert
cartridge back into the antiscale cartridge drawer.
The first time you use the iron or insert a new
cartridge, hold the trigger for up to two minutes to
pull the steam through to the soleplate.
Textiles and clothes usually carry ironing
instructions. If not, follow the temperature guide
above, but test the temperature by ironing the
hem of the garment or other discreet area first.
It is advised to begin with ‘cool’ fabrics (see
above) and work up to higher settings. An iron
heats up quicker than it cools down so you’ll save
time and electricity.
If you turn the temperature level down from a hot
setting to a cooler setting, wait until the
temperature setting indicator
(22/23/24/25/31)
stops flashing (indicating the correct temperature
has been reached) before you continue ironing.
You can carry the appliance by the iron handle
(3)
once the iron (5) is locked to the base unit (17)
using the iron-to-base lock (11) (see ‘Storing the
steam iron’ on page 11).
Lo
catio
n
Bef
or
e first us
e
H
eat setting markings on the temperature dial of all Morphy Richards irons match those of the International
Textile Care Labelling Code
Temperature guide
S
ymbol
(
120°C Max) Cool (160°C Max) Warm (210°C Max) Hot MAX setting
Temperature level
settings
Do not iron
• •• •••
Fabric Nylon, Acetates,
synthetic fabrics
Wool, Polyester
mixtures
Cotton, Linen
Rayon, Rayon
mixtures
Ironing Iron on wrong side,
if moisture
required, use
damp cloth
(not Acetate)
Fabrics requiring
this setting usually
require steam
pressing.
Steaming
Without steam
Steam level setting
(
see step 4 of
‘Using the Steam
Generator’ on
p
age 7)
No steam
(
see ‘Dry ironing’
on page 9)
Low Medium / High High
RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 6
Loading ...
Loading ...
Loading ...