Loading ...
Loading ...
Loading ...
8 English
damage the heater.
- Check your heater cord and plug connections. A loose fitting outlet
can cause the plug to overheat or cause a fire. Be sure plug fits tight in
the outlet. Check frequently during use to make sure plug and outlet
are not hot. If so, discontinue using heater and have outlet replaced by
a qualified electrician.
- Note: Heaters draw more current than other small appliances,
overheating of the outlet may occur even if it has not occurred with
the other appliances.
- Never ignore the signs of an electrical problem in home, such as:
warm outlet coverplates, sparks when plugging in or operating, lights
flickering/dimming during operation. Immediately turn off and unplug
the appliance if any such problems are noticed. Contact a qualified
electrician to investigate possible causes before operating the
appliance again.
- Before moving, repositioning, servicing, cleaning and when not in
use, use the product controls to turn off the power and then unplug.
To disconnect from outlet, grasp and pull only the plug. Also, power
off and unplug if the product will be left unattended for an extended
period of time or during electrical storms.
- If your heater suddenly stops working:
• This heater is equipped with a thermal cutout safety feature
designed to automatically shut off when overheating is detected.
See the “RESET HEATER” instructions in this guide to determine how
to check and reset the heater.
• If the heater and other electrical products suddenly stop working at
the same time, your home circuit breaker or fuse may have tripped
33
Español
Su calefactor cuenta con un sistema de apagado de seguridad de varios niveles
diseñado para evitar el recalentamiento. El sobrecalentamiento se puede
producir cuando las entradas o las salidas están bloqueadas. Si esto sucede, el
sistema de apagado de seguridad corta la energía hacia el calefactor y usted
debe reiniciarlo manualmente.
1. Apague el calefactor y luego desenchufe el cable.
2. Elimine las obstrucciones.
3. Espere de 5 a 10 minutos para que el calefactor se enfríe.
4. Enchufe el cable y coloque el calefactor en la posición deseada.
5. Encienda el calefactor. Su calefactor Sharper Image ahora debería funcionar
normalmente.
Si el calentador y otros productos eléctricos dejan de funcionar repentinamente
al mismo tiempo, es posible que el disyuntor o fusible de su hogar se haya
disparado debido a una sobrecarga de energía. Considere solo hacer funcionar
su calentador en la configuración “baja”, encender solo un calentador a la vez
y desconectar todos los demás productos eléctricos mientras enciende el
calentador, y / o contratar a un electricista para instalar un circuito adicional al
sistema eléctrico de su hogar.
NOTA:
Si el sistema de apagado de seguridad apaga el calefactor de manera
repetida o si este no se reinicia después del procedimiento anterior, llame al
Departamento de Servicio al Consumidor de Sharper Image al número gratuito
833-800-8669.
REINICIAR EL CALEFACTOR
Loading ...
Loading ...
Loading ...