Loading ...
Loading ...
Loading ...
Cooktop Installation
1.Visuallyinspectthecooktopfordamage.Alsomake
sureallcooktopscrewsaretight(seeFigure6).
Screws Figure 6
2. Install the retainer brackets (See Figure 7).
The retainer brackets MUST be installed, to meet
local codes or, in their absence, with the National
Electrical Code ANSI/NFPA No, 70--latest edition, or
with CSA Standard C22,1, Canadian Electrical Code,
Part I (see Figure 7 & 8),
Built-in
spring
Retainer
bracket
Figure 7
Countertop
Retainer Brackets Must
t Be Installed At Least
1/16" (0.16 cm) BELOW
Countertop
3. Install optional plastic spacers, if needed.
For 30" Cooktop:
If your cutout is 29 5/8" - 30", you must install spacer.
For 36" Cooktop:
If your cutout is 35"- 36", you must install spacer.
The spacers and screws can be found in a plastic bag
packaged with the unit. Install those spacers using the
screws at the positions illustrated on figure 9.
Spacer
Installspacers
Figure 9
4. Set the cooktop into the countertop cutout.
NOTE: Do not use caulking compound; cooktop should
be removable for service when needed.
Granite countertop Installation Kit
A Granite Countertop Installation kit # 903061-9010 can
be ordered through a Service Center,
Checking Operation
Refer to the Use and Care Guide for operation.
Do not touch cooktop glass or elements.
They may be hot enough to burn you.
Position brackets
on unit cutout
center line.
Figure 8
Before You Call for Service
Read the Before You Call for Service Checklist and
operating instructions in your Use and Care Guide.
It may save you time and expense. The list includes
common occurrences that are not the result of defective
workmanship or materials in this appliance.
Loading ...