Loading ...
Loading ...
Loading ...
ENG - 18 ENG - 19
Wallmount Components
430
Wall Mount Guide
Holder-Fix Mount
(2 EA)
Bracket-Wall
(2 EA)
1. Place the Wall Mount Guide against the wall
surface.
• The Wall Mount Guide must be level.
• If your TV is mounted on the wall, install
the Soundbar at least 5 cm below the TV.
5 cm or more
2. Mark the location where the screws will go
through on the wall, and then remove the
Wall Mount Guide. Next, drill holes for the
screws using an appropriately sized drill bit.
Center Line
Center Line
3. Fasten the 2 Bracket-Wall pieces rmly to
the wall at the marked locations using the
appropriate screws.
4. Attach the Soundbar to the 2 Bracket-Wall
pieces as shown in the illustration.
5. Insert a Holder-Fix Mount into each hole on
the product’s bottom side. Tighten each
Holder-Fix Mount to x the Soundbar to the
2 Bracket-Wall pieces.
DC 19V
AUX IN
OPTICAL IN
HDMI IN
HDMI OUT
(TV-ARC)
5V 0.5A
• Do not hang onto the installed unit and avoid
striking or dropping the unit.
• Secure the unit rmly to the wall so that it
does not fall off. If the unit falls off, it may
cause an injury or damage the product.
• When the unit is installed on a wall, please
make sure that children do not pull any of the
connecting cables, as this may cause it to fall.
• For the optimal performance of a wall mount
installation, install the speaker system at
least 5 cm below the TV, if the TV is mounted
on the wall.
• For your safety, if you do not mount the unit
on the wall, install it on a secure, at surface
where it is unlikely to fall.
Loading ...
Loading ...
Loading ...