Loading ...
Loading ...
Loading ...
2. Turn the cover counterclockwise and re‐
move.
3. The upper bulb is the high beam/headlight
flasher and the lower bulb is the daytime
running lights.
High beams/headlight flasher
55-watt bulb, H7.
1.
Tip the connector with the bulb up slightly
and pull out carefully.
2. Pull the bulb off the connector and insert
the new bulb.
3. Install the new bulb in reverse order of re‐
moval.
4. Place the cover according to the arrow
markings on the headlight housing.
5. Close the headlight housing with the lid.
Daytime running lights
21-watt bulb, W21W.
1.
Turn the bulb holder counterclockwise and
remove.
2. Carefully remove the bulb from the socket.
3. Install the new bulb in reverse order of re‐
moval.
4. Place the cover according to the arrow
markings on the headlight housing.
5. Close the headlight housing with the lid.
Xenon headlights
Information
DANGER
There can be high voltage in the lighting
system. There is danger to life. The manufac‐
turer of your vehicle recommends that the
work on the lighting system including bulb re‐
placement be performed by a dealer’s service
center or another qualified service center or re‐
pair shop.◀
Because of the long life of these bulbs, the
likelihood of failure is very low. Switching the
lights on and off frequently shortens their life.
If a bulb fails, turn on the front fog lamps and
continue the trip with great care. Comply with
local regulations.
For checking and adjusting headlamp aim,
contact a dealer’s service center or another
qualified service center or repair shop.
Overview
1 Parking lights / daytime running lights
2 Low beams/high beams/headlight flasher
3 Turn signal/side marker light
Xenon headlights
Low beams and high beams are designed with
xenon technology.
The parking lights and daylight running lights
are made using LED technology.
Seite 231
Replacing components Mobility
231
Online Edition for Part no. 01 40 2 969 976 - II/16
Loading ...
Loading ...
Loading ...