Loading ...
Loading ...
Loading ...
77
D
E
EN
FR
NL
DA
NO
SV
FI
TR
EL
PL
CS
SK
SL
HU
HR
RO
RU
UK
BG
77
Using your steam generator
• Completely unwind the power cord and the steam cord from its storage space – 19.
• Lower the retaining hoop (depending on model) to unlock the safety catch – fig.3.
• Plug in your steam generator to an earthed socket.
• Press on the on / off switch. The green light (located on the control panel)
flashes and the boiler heats up – fig.15.
When the green “steam ready” light stops flashing (after 2 minutes approximately), the
appliance is ready.
Use
Steam ironing
• Place the iron's temperature control slide according to the type of fabric to be
ironed (see table below).
• The iron’s light will come on. Important: whenever you start using your iron
and whenever you reduce the temperature during use, the iron is ready for use
when its indicator light goes out and when the green light located on the
control panel comes on and remains on. During use, when you increase the
temperature of the iron, you can start ironing immediately, but make sure you
only increase your steam flow once the iron’s light has gone out.
• Adjust the steam output control dial (located on the control panel).
• When the iron is in use, the iron thermostat light on the iron comes on and goes off according to the soleplate
temperature requirement without this having any effect on the use of the appliance.
• To obtain steam, press on the steam control button under the iron handle and keep it pressed – fig.10. The steam
will stop when you release the button.
• When starting, and regularly while it is being used, your steam generator's electric pump injects water into the
boiler. It makes a noise but this is quite normal. You may also hear a clicking noise which is the steam valve
opening. Again this is normal.
• Always spray starch onto the reverse side of the fabric to be ironed
Set the temperature and steam control
Check the garment label if you are not
sure what type of fabric it is made of.
• Iron temperature setting:
- Start with the fabrics to be ironed at a low temperature (•) and finish with those which need higher temperatures
(••• or Max).
- For mixed fibre fabric: set the ironing temperature to the setting for the most delicate fabric.
- Woollen garments: press repeatedly on the steam control button – fig.10 to obtain short bursts of steam, without
placing the iron on the garment itself.
• Steam output setting:
- Thick fabric: increase the steam setting.
- If you intend to iron at low temperature, set the steam control button to MINI and press the steam button
whenever needed.
• If you put your thermostat in the “min” position, the iron does not become hot.
MODE ECO:
Your steam generator iron has an ECO mode function which uses less power whilst still guaranteeing a
sufficient steam flow for you to iron your garments properly. In order to use this function, once the
thermostat of your iron has been correctly set (see table above), position the steam flow setting on the
ECO segment
- fig.17. Using the Eco mode will allow you to press fabrics at minimum temperature ••.
However, for very thick or wrinkled fabrics, we recommend using the maximum temperature in order to
guarantee best results.
Dry ironing
- Do not press the steam control button under the iron handle.
T YPE DE TISSUS
RÉGLAGE DU CURSEUR
DE TEMPÉRATURE
RÉGLAGE DU BOUTON
DE VAPEUR
Laine, soie, viscose
Synthétiques
(polyester, acetate, acrylique, polyamide)
RÉGLAGE TEMPÉRATURE ET DÉBIT VAPEUR EN FONCTION DU TYPE DE TISSU À REPASSER :
Lin, coton
TEXTIELSOORT
INSTELLING VAN DE TEMPERATUUR-
REGELAAR VAN HET STRIJKIJZER
INSTELLING VAN DE STOOMREGELAAR
Linnen, Katoen
Wol, Zijde, Viscose
Synthetische stoffen
(polyester, acetat, acryl., polyamide)
DE TEMPERATUURREGELAAR EN DE STOOMREGELAAR INSTELLEN OP DE TE STRIJKEN TEXTIELSOORT:
FR
NL
DE
EN
EL
DA
FI
SV
NO
BG
HU
CS
HR
SK
RU
UK
TR
PL
ET
LT
LV
GEWEBEART
EINSTELLUNG DES
TEMPERATURSCHALTERS
EINSTELLUNG DES DAMPFKNOPFES
Leinen, Baumwolle
Wolle, Seide, Viskose
Synthetik,
(polyester, Acetat, Acryl, Polyamid)
STELLEN SIE DEN TEMPERATURSCHALTER DES BÜGELEISENS UND DES BOILERS
AUF DIE ZU BÜGELNDE GEWEBEART EIN
TYPE OF FABRICS
SETTING TEMPERATURE
CONTROL
SETTING STEAM OUTPUT CONTROL
DIAL
Linen, cotton
Silk, Wool
Synthetics
(polyester, acetate, acrylic, polyamide)
SETTING THE TEMPERATURE AND STEAM OUTPUT ACCORDING TO TYPE OF FABRIC TO BE IRONED:
ΥΦΑΣΜΑΤΑ
Πλ κτρο ρ θµιση τη
θερµοκρασ α του σ δερου
Πλ κτρο ρ θµιση τη παροχ
ατµο
ΛΙΝΑ, BΑΜBΑΚΕΡΑ
ΜΑΛΛΙΝΑ, ΜΕΤΑΞΩΤΑ,
ισκοζη
ΣΥΝΘΕΤΙΚΑ
(Πολυεστ ρα , Ασετ τ, Ακρυλικ ,
Ν
λον)
ΡΥΘΜΙΣΗ ΤΟΥ ∆ΙΑΚΟΠΤΗ ΘΕΡΜΟΚΡΑΣΙΑΣ ΚΑΙ ΤΟΥ ∆ΙΑΚΟΠΤΗ ΠΑΡΟΧΗΣ ΑΤΜΟΥ ΑΝΑΛΟΓΑ ΜΕ ΤΟ ΕΙ∆ΟΣ ΤΟΥ
ΥΦΑΣΜΑΤΟΣ ΠΟΥ ΠΡΟΚΕΙΤΑΙ ΝΑ ΣΙ∆ΕΡΩΣΕΤΕ.
S
TOF
I
NDSTILLING AF
TEMPERATURVÆLGEREN
I
NDSTILLING AF DAMPKNAPPEN
Hør/linned
Uld, Silke
Syntetisk
(polyester, acetat, akryl, polyamid)
INDSTILLING AF
TEMPERATURKNAP SAMT DAMPKNAP AFHÆNGIGT AF DEN STOFTYPE, DER SKAL STRYGES :
Kangastyyppi Silitysraudan lämpösäädin
Höyrynmäärän säätöpyörän
liikuttaminen
Pellava, Puuvilla
Villa, Silkki, Viskoosi
Te ko k u i d u t,
Polyesteri, Asetaattikuidut,
Akryylikuidut, Polyamidi
SÄÄDÄ LÄMPÖTILA JA HÖYRYN MÄÄRÄ SOPIVAKSI SILITETTÄVÄLLE KANKAALLE:
T
EXTILER
I
NSTÄLLNING AV TEMPERATUR
I
NSTÄLLNING AV ÅNGFLÖDE
Linne, bomull
Ylle, silke
Syntetmaterial
(polyester, acetat, akryl, polyamid)
REGLERA STRYKJÄRNETS TEMPERATUR OCH ÅNGTRYCK EFTER DET MATERIAL SOM SKALL STRYKAS:
TYPE STOFF INNSTILLING AV TEMPERATUR INNSTILLING AV DAMPMENGDE
Linen (Lin), Cotton (Bomull)
Wool (Ull), Silk,Viscose
(Silke, Viskose)
Syntetic,
Acetate,Acrylic, Polyamide,
Polyester (Syntetiske stoffer
)
STILL INN TEMPERATURKONTROLLEN OG DAMPINNSTILLINGEN ETTER HVILKEN
TYPE STOFF SOM SKAL STRYKES:
Вид тъкан
PЕГУЛИРАНЕ НА ТЕРМОСТАТА PЕГУЛАТОР ЗА ПАРА
Лен, памук
Вълна, коприна, вискоза
Синтетика
(полиестер, ацетат,
акрил, полиамид)
РЕГУЛИРАНЕ НА ТЕМПЕРАТУРАТА И КОЛИЧЕСТВО ПАРА В ЗАВИСИМОСТ ОТ ВИДА ТЪКАН ЗА ГЛАДЕНЕ :
Szčvet
A
HŐMÉRSÉKLET
BEÁLLITÁSI GOMB
A
GŐZMENNYISÉG
BEÁLLITÁSI GOMB
Lenszövet, pamut
Gyapjú, selyem, Viszkóz
Szintetikus kelme
(poíyészter, acetát, akril, polyamia
kel
mék
)
A VASALÁSI HŐMÉRSÉKLET ÉS A GŐZMENNYISÉG BEÁLLITÁSA A VASALANDÓ
SZÖVET TIPUSÁTÓL FÜGGŐEN:
M
ATE RIÁL
N
ASTAVENÍ KNOFLÍKU TEPLOTY
N
ASTAVENÍ KNOFLÍKU PÁRY
Len, Bavlna
Vlna, Hedvábí, Viskóza
Syntetika
(polyesterové, ace-
tátové, akrylové, polyamidové
látky)
NASTAVTE TEPLOTU A PARNÍ VYKON PODLE TYPU TKANINY, KTERÁ BUDE ŽEHLENA :
T
KANINE
P
ODE
š
AVANJ E
I
ZBORNIKA
TEMPERATURE
P
ODE
š
AVAN JE
I
ZBORNIKA
PAR E
Lan, pamuk
Vuna, svila, viskoza
SINTETIKA (
Poliester, Ace-
tat, Akril,Poliamid)
POSTAVLJANJE TEMPERATURE I PARE OVISNO O TIPU TKANINE KOJU GLAčATE.
L
ÁTKY
N
ASTAVENIE REGULÁTORA TE
-
PLOTY
N
ASTAVENIE REGULÁTORA
PARY
Ĺan, Bavlna
Vlna, Hodváb, Viskóza
Syntetika
(z polyesteru, acetátu,
akrylu, nylónu)
NASTAVENIE TEPLOTY A PRIETOKU PARY PODĽA TYPU LÁTKY, KTORÁ SA MÁ ŽEHLIŤ:
Кип ткани
Нстановка температуры утю
Г
а с
помощью ползунка
Положение ре
Г
ул
FL
тора
подачи пара
Лен
Хлопок
Шерсть
Шелк, Вискоза
Синтетика
Полиэстер, Ацетат,Акрил,
Полиамид
РЕГУЛИРОВКА ТЕМПЕРАТУРЫ В ЗАВИСИМОСТИ ОТ ТИПА ПРОГЛАЖИВАЕМОЙ ТКАНИ:
K
UMAFL TÜRÜ
I
SI AYAR DÜĞMESI
B
UHAR AYAR DÜĞMESI
Keten, Pamuklu
Yünlü, İpek, Viskoz
Sentetik
(polyester, asetat, akrilik, naylon)
TÜLENECEK KUMAFI TÜRÜNE GÖRE SICAKLIĞIN VE BUHAR DEBİSİNİN AYARLANMASI
RODZAJE TKANIN
USTAWIENIE REGULACJI
TEMPERATURY
USTAWIENIE POKRĘTŁA
REGULACJI STRUMIENIA
Len, bawełna
Jedwab, wełna
Tkaniny syntetyczne
(poliester, włókno octanowe,
akryl, włókno poliamidowe)
USTAWIANIE TEMPERATURY I WYDATKU STRUMIENIA PARY W ZALEŻNOŚCI OD RODZAJU TKANINY,
KTÓRA MA BYĆ PRASOWANA:
KANGA TÜÜP TEMPERATUURIREGULAATORI ASEND
AURU VÄLJUTUSE
REGULAATOR
Linane, puuvillane
Siid, villane
Sünteetiline
(polüester, atsetaat, akrüül, polüamiid)
TEMPERATUURI JA AURU VÄLJUTUSE REGULEERIMINE VASTAVALT
TRIIGITAVA KANGA TÜÜBILE:
AUDINIĮ TIPAS
TEMPERATŪROS NUSTATYMO
RANKENĖL
ĖS PADALA
GARO REGULIATORIAUS
RANKENĖLĖS PADALA
Linas, medvilnė
Vilna, šilkas
Sintetika
(poliesteris, acetatas,
akrilas, poliamidas)
TEMPERATŪROS IR GARO IŠLEIDIMO REGULIAVIMAS, PRIKLAUSOMAI NUO LYGINAMO AUDINIO TIPO
AUDUMU VEIDI
TEMPERATŪRAS
IESTATĪJUMI
TVAIKA PADEVES SKALA
Lins, kokvilna
Zīds, vilna
Sintētika
(poliesteris, acetāts, akrils,
poliamīds)
IESTATĪT TEMPERATŪRU UN TVAIKA PADEVI ATKARĪBĀ NO GLUDINĀMĀ AUDUMA VEIDA:
Тип тканини Регулювання температури же
Г
улюванн
FL
витрати пари
Льон
бавовна
Вовна,
шовк, віскоза
Синтетичні тканини
(поліефірні, ацетатні, акрилові,
поліамідні волокна)
Регулювання температури та витрати пари відповідно до типу тканини, яка підлягає
прасуванню:
Do not place the iron on a metal
support.When taking a break from
ironing, always place the iron on the iron
rest plate of the unit. It is equipped with
non-slip pads and has been designed to
withstand high temperatures. Always use
a vented/mesh ironing board and be
careful of hot steam when ironing close
to the edges of the board.
To prime the steam circuit, either before using
the iron for the first time, or if you have not
used the steam function for a few minutes, press
the steam control button several times in a row,
holding the iron away from your clothes. This
will enable any cold water to be ejected from
the steam circuit.
The first time the appliance is
used, there may be some fumes
and smell but this is not
harmful. They will not affect use
and will disappear rapidly.
1800129556 GV83XX-GV84XX E0 A11_110x154 25/03/13 14:43 Page77
Loading ...
Loading ...
Loading ...