Loading ...
Loading ...
Loading ...
English - 29
OPERATING
(6) Ice Type
Touch the Ice Type button to change the
ice type.
Each time you touch the Ice Type button,
the cubed and crushed ice modes
alternate and the Cubed or Crushed ice
icon lights up, indicating your selection.
If you don’t need ice, turn the function o
to save on water and energy consumption.
(See Ice Maker O below.)
Lighting
Touch the Cubed button for three seconds
to set the Dispenser LED lamp (under the
display) to continuous mode so that it
stays on continuously.
If you want the Dispenser lamp to come on
only when some one uses the dispenser,
touch this button for 3 seconds again to
turn the continuous mode o .
(7) Ice Maker O (Hold 3sec)
Touch the Ice Maker O button for
3seconds until the Ice Maker O Indicator
( ) illuminates.
(8) Filter
Water fi lter usage
This icon will light up when you need to
change the fi lter.
After you use about 300 gallons of water,
the fi lter indicator lights up. (in about 6
months)
The icon will blink red for several seconds
when you open or close the door.
After you install the new water fi lter, touch
and hold the Crushed Ice button for
3Seconds to reset the fi lter.
- If water is not dispensing or dispensing
slowly, you need to replace the water
fi lter because the water fi lter is clogged.
- Some areas have large amounts of lime
in their water, which causes the water
fi lter to clog more quickly.
Exhibition Mode
• In case of Exhibition Mode, It seems
working but doesn’t make cool air.
To cancel this mode, touch the Freezer,
Fridge and Door Alarm buttons at the
same time for 5 seconds until “Dingdong”
sounds.
Or you can cancel the exhibition mode
by turning the power o .
CAUTION
DA68-03194H (EN)-04.indd 29DA68-03194H (EN)-04.indd 29 2015. 6. 1. 1:032015. 6. 1. 1:03
Loading ...
Loading ...
Loading ...