Loading ...
Loading ...
Loading ...
8 Operation of buttons
Operation of buttons
1. ON/OFF Button
This button turns the air conditioner ON and OFF.
2. MODE Button
Press this button to modify the air conditioner mode in a
sequence of following:
AUTO > COOL > DRY > HEAT > FAN
NOTE: Please do not select HEAT mode if the machine you
purchased is cooling only type. Heat mode is not supported by
the cooling only appliance.
3. FAN Button
Used to select the fan speed in four steps:
AUTO > LOW > MED > HIGH
NOTE: You can not switch the fan speed in AUTO
or DRY mode.
4. SLEEP Button
• Active/Disable sleep function. It can maintain the most
comfortable temperature and save energy. This function
is available on COOL, HEAT or AUTO mode only.
• For the detail , see sleep operation on page.
NOTE: While the unit is running under SLEEP mode, it will
be cancelled if MODE, FAN SPEED or ON/OFF button is
pressed.
5. TURBO Button
Active/Disable Turbo function. Turbo function enables the
unit to reach the preset temperature at cooling or heating
operation in the shortest time.
6. SELF CLEAN Button
Active/Disable Self Clean function
7. UP Button (
)
Push this button to increase the indoor
temperature setting in 1°C increments to 30°C.
DOWN Button (
)
Push this button to decrease the indoor
temperature setting in 1°C increments to 17°C.
8 SILENCE/FP Button (FP frost protection - when selected
prevents the room temperature from dropping below 8°C)
• Active/Disable SILENCE function. If pushing more than
2 seconds, the FP function will be activated, pushing
more than 2 seconds again to disable.
• When the Silence function is activated, the compressor
will operate at low frequency and the indoor unit will
bring faint breeze, which will reduce the noise to the
lowest level and create a quiet and comfortable room for
you. Due to low frequency operation of compressor, it
may result in insufficient cooling and heating capacity.
• The FP function can only be activated during the heating
operation (only when the setting mode is HEAT). The unit
will operate at a setting temperature of 8°C. The display
window of indoor unit will display FP. Press the buttons of
ON/OFF, SLEEP, FP, MODE, FAN SPEED,UP or DOWN
while operating will cancel the FP function.
ON/OFF
MODE
FAN
TEMP
SLEEP SWING DIRECT
LED FOLLOW ME
TURBO SELF CLEAN
TIMER
OFF
TIMER
ON
SILENCE
FP
1
2
3
4
5
12
11
10
9
8
7
136
Loading ...
Loading ...
Loading ...