Loading ...
Loading ...
Loading ...
Using your Induction Hob
To start cooking
1. Touch the ON/OFF control.
After
power on, the
buzzer
beeps
once, timer
control show “CL“ ,heating zone selection controls
show “ 00“, indicating that the induction hob has entered
the state of standby mode.
2.
Place a suitable pan on the cooking zone that you
wish to use.
•
Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
3.
Touching the heating zone selection control,
and a indicator where you touched will flash
4. Adjust heat setting by touching the slider control.
•
If you don’t choose a heat setting within 1 minute,
the Induction hob will automatically switch off.
You will need to start again at step 1.
•
You can modify the heat setting at any time during
cooking.
alternately with the heat setting
If the display flashes
This means that:
Cooking zone
The base diameter of induction cookware
Minimum (mm)
Maximum (mm)
1,2, 140 220
3 0 300
4 120 160
Flexible zone
220 220x400
22
25
Loading ...
Loading ...
Loading ...