Loading ...
Loading ...
224244 23
1. Operations
1.1 Your new hob
This manual covers the models: SE 2642 ID, SE 2742 ID, SE 2842 ID.
1.2 Touch-Control panel
After the supply voltage has been applied (mains connection), a rapid self-test of the control unit (calibration
adjustment) is then carried out.
On/off key Plus key (to turn up)
Locking key Power key (turbo cooking zone)
Control lamp lock ! Cooking zone key
Timer key " Cooking level display
Timer display # Cooking zone stand-by dot
Timer control lamp (lights up if cooking zone can be used)
Minus key (to turn down)
1.3 Touch-Control operations
Each key operation is always confirmed by an acoustic signal.
Pressing the on/off key
switches on the control system. A “0” is lit for all cooking level indicators " and the
cooking zone stand-by dot
# blinks. The next action must be carried out within 10 seconds, otherwise the control
system will automatically switch off again.
To switch on a cooking zone, press the corresponding cooking zone key
! of the required cooking zone. The
appropriate cooking zone stand-by dot
# of the activated cooking zone lights up.
Select a cooking level from 1 to 9 by means of the Minus or Plus keys
/. When switched on, each cooking zone
can be switched off again at any time.
The Minus key
can be used to turn the cooking level down to “0”; if the Minus and Plus keys + are pressed
at the same time, the cooking zone can be switched off directly.
In all cases the complete control system can be switched off at any time by pressing the on/off key
.
Pressing locking key
prevents all the keys - with the exception of the on/off key - from being operated by
mistake. This state is indicated by control lamp
. Pressing the locking key cancels this command again.
Residual heat display
The residual heat display is by means of an illuminated “H” on the appropriate cooking level display ". The “H"
switches off as soon as the cooking zone has cooled down.
Loading ...
Loading ...
Loading ...