Loading ...
Loading ...
Loading ...
8
OPERATING INSTRUCTIONS
You can get a necessary heat setting in a shorter time
if you activate the Automatic Heat Up function. This
function sets the highest heat setting for some time (see
the graphic), and then decreases to the necessary heat
setting. To start the Automatic Heat Up function for a
cooking zone:
1. Touch
( comes on in the display).
2. Immediately touch the necessary heat setting. After
3 seconds
comes on in the display. To stop the
function change the heat setting.
The Power function makes more power available to the
induction cooking zones. The Power function is activated
for 5 minutes at most. After that the induction cooking
zone automatically switches back to heat setting
. To
switch on, touch , comes on. To switch off, touch a
heat setting between and .
The power management divides the power between two
cooking zones in a pair (see the illustration). The power
function increases the power to the maximum level for one
cooking zone in the pair. The power in the second cooking
zone automatically decreases. The heat setting display for
the reduced zone changes between two levels.
The Chef function activates all cooking zones and
automatically activates the Bridge function for all of the
zones. This function sets the same heat setting as the
one you set the last time. For the first activation the heat
setting of the left pair of zones is set to
, the middle
pair is set to and the right pair is set to .
To activate this function:
• Touch
, and the indicator comes on. All cooking
zones operate for 9 minutes. If the cooking zones
stay empty, the symbol comes on. After
9 minutes an acoustic signal sounds and the empty
cooking zones are set to .
To resume this function:
• Touch
to put or move cookware on the
deactivated pair of cooking zones. To deactivate
this function:
• Touch
to deactivate the Chef function for the
cooking zones you chose and keep the last heat
setting of the cooking zones for this pair. The
indicator goes off.
• Settheheatsettingto
or let the Count Down
Timer deactivate the cooking zones. The indicator
goes off.
When the Chef function is off, the pot detection time is
2 minutes.
Use the Count Down Timer to set how long the cooking
zone operates for only this operation.
.
The selection of the Timer function is possible for cooking
zones that are active and after the heat setting is set.
• Tosetthecookingzone:touch
again and again
until the indicator of the necessary cooking zone
comes on.
When this function is activated,
comes on.
• ToactivatetheCountDownTimer:touch
of the
timer to set the time (00 - 99 minutes). When the
indicator of the cooking zone starts to flash slowly,
the time counts down.
• Toseetheremainingtime:setthecookingzone
with
. The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
• TochangetheCountDownTimer:setthecooking
zone with
and touch or .
• TodeactivatetheCountDownTime:setthe
cooking zone with
and touch . The remaining
time counts down to 00. The indicator of the
cooking zone goes out.
When the timer countdown comes to an end, the sound
operates and 00 flashes.
The cooking zone deactivates.
•Todeactivatethesound:touch
.
Loading ...
Loading ...
Loading ...