Loading ...
Loading ...
Loading ...
10
AU
WEIGHT SENSOR
THIS MICROWAVE OVEN USES THE WEIGHT SENSOR TECHNOLOGY for some 6th sense functions (Defrost, Crisp
and Steam); when you select one of these 6thSense functions, you just need to select type of
food you want to process and press start: the microwave automatically detects the weight of
food and set the cooking time accordingly.
DURING THE SENSING PHASE weight icon blinks and progress bar shows the
weight calculation process (see sample below, from 6th Defrost function).
WEIGHT SENSING CALIBRATION
Weight sensor technology requires a Calibration process before rst use. Suggest user to make
the calibration once a year.
THE CALIBRATION PROCESS MUST BE DONE with only the Turn Table glass in the cavity.
PRESS AND HOLD for few seconds the Stop TurnTable button.
THE CALIBRATION PROCESS starts and the display shows:
-- weight icon blinking
-- calibration progress bar
WHEN THE CALIBRATION PROCESS is nished, the Microwave returns to stand by mode.
SET CLOCK
WHEN THE APPLIANCE IS FIRST PLUGGED IN or after a power failure, the
product will enter clock setting. If the clock is not set, the display
will remain “:“ instead of the clock.
NOTE: YOU CAN PRESS&HOLD THE STOP BUTTON for a few seconds in
standby mode to access the clock setting mode.
q
TURN THE ADJUSTABLE KNOB to set the hours.
w
PRESS KNOB BUTTON. (The two right-hand digits (minutes) flicker).
e
TURN THE ADJUSTABLE KNOB to set the minutes.
r
PRESS THE KNOB BUTTON AGAIN.
THE CLOCK IS SET and in operation.
IF STOP is pressed in clock setting mode, the clock will be disabled
the display shows “:“.
NOTE: KEEP THE DOOR OPEN WHILE SETTING THE CLOCK. This gives you 10
minutes to complete the setting of the Clock. Otherwise, each step
must be accomplished within 60 seconds.
Loading ...
Loading ...
Loading ...