Loading ...
Loading ...
Loading ...
E-17
Detach the filter cover.
1
2
mark
Filter cover
(Adjustment) mark
This marking indicates
"Release".
3
Removing dust from filters
Turn the mark of the filter cover in the "Release"
(adjustment) mark direction.
Raise the filter cover
straight up.
Attach the inner cylinder filter and clean filter.
4
Do not firmly grip the filter cover. Doing so may cause deformation or damage.
Note
Clean filter
Inner
cylinder filter
Maintenance brush
Maintenance brush
Detach the clean filter.
Remove the inner cylinder filter.
Remove attached dust by using the maintenance brush.
Remove attached dust by using the
maintenance brush.
Remove dust from the clean filter.
Remove dust from the inner cylinder filter.
When removing dust, do not slap
the clean filter onto the floor, etc.
Doing so may cause damage.
Note
Adjust the protrusion of the inner cylinder
filter with the groove of the dust case.
Align the protrusion of the clean filter with
the groove of the dust case.
Inner cylinder
filter
protrusion
groove
Dust case
Clean filter
protrusion
groove
Dust case
Emptying the dust case
TS_PV-XC500.indd 17TS_PV-XC500.indd 17 8/7/2015 10:24:43 AM8/7/2015 10:24:43 AM
Loading ...
Loading ...
Loading ...