Loading ...
Loading ...
Loading ...
E-14
You can change to various angles and lengths according to the area to be cleaned.
You can rotate in 45° increments.
Pressing the length adjustment button
Adjustment
You can adjust the length as you like.
3 angles are available.2 angles are available.
Multi angle brush
CAUTION
Risk of injury.
Do not press the length adjustment button
during operation. The extendable multi angle
brush may shorten suddenly.
When shortening the extendable multi angle
brush, do not hold the uneven part of the inner
pipe. Your hand may get pinched.
When changing the angle, do not hold the
rotating section. Your hand may get pinched.
Do not rotate while your fingers are inserted into the inlet
of the multi angle brush. Your fingers may get pinched.
Uneven part of the inner pipe
Rotating
section
Inlet
(do not insert fingers)
When using the extendable multi angle wide
brush, note the following points.
Do not add excessive force. Doing so may result in damage.
- Do not use it to clean the floor.
- Do not let it fall or add excessive force in the
direction of
A
.
- To change the length, do so pressing the length
adjustment button.
- To change the angle of the inserting side, do so pressing the angle adjustment button.
You can wash the inlet of the extendable multi angle wide brush with water. After washing, thoroughly air dry before use.
Vacuuming water may result in damage.
If fibrous dust clogs the end or interior of the multi angle wide brush, suction power is reduced, so remove
the dust.
A
Note
The linen beat head can be washed with water.
(After washing, thoroughly air dry in the shade
before use.)
Linen beat head
Using the linen beat head
CAUTION
Risk of damage to the floor.
Do not use the linen beat head for
cleaning the floor, tatami, carpet, etc.
The linen beat head can vacuum mite dirts and dead
bodies, fine dust, lints, etc. without damaging the blanket.
How to clean
Do not firmly press on the linen beat head.
Doing so may cause deformation or damage.
Note
TS_PV-XC500.indd 14TS_PV-XC500.indd 14 8/7/2015 10:24:42 AM8/7/2015 10:24:42 AM
Loading ...
Loading ...
Loading ...