Loading ...
Loading ...
Loading ...
Installation
56
60 cm models:
• 220-240 V 3N~ (default)
6 x 1.5 mm² six-core cable.
If the cable is replaced, the appliance can
also function in the following modes:
*use the jumpers provided
• 380-415 V 2N~
4 x 2.5 mm² four-core* cable.
• 220-240 V 1N~
3 x 4 mm² three-core* cable.
The diagram below illustrates the power
supply terminal from below, with no cables
connected.
38 cm models:
• 220-240 V 1N~ (default)
3 x 1.5 mm² three-core cable.
Fixed connection
Fit the power line with an omnipolar circuit
breaker in compliance with installation
regulations.
The circuit breaker should be located near
the appliance and in an easily reachable
position.
Connection with plug and socket
Make sure that the plug and socket are of
the same type.
Avoid using adapters and shunts as these
could cause overheating and a risk of
burns.
Run the power cable in the rear
part of the unit. Take care that it
does not come into contact with
the lower part of the hob or any
oven built-in underneath it.
Be careful when connecting
additional electrical appliances.
Connection cables must not come
into contact with hot cooking
zones.
Loading ...
Loading ...
Loading ...