Loading ...
Loading ...
Loading ...
Use
51
EN
Demo mode (for exhibitors only)
To activate the demo mode:
1. Ensure that the device was disconnected
from the electrical mains at least 10-15
seconds before.
2. Connect the device to the electrical
mains.
3. Within two minutes, simultaneously press
the control lock button and the pause
button for a few seconds, until a
buzzer sounds.
4. Simultaneously place one finger on the
slider on the left and one finger on the
slider on the right with respect to the
cooking zones closer to the general
control zone.
A buzzer will sound and the display above
the general control zone will show
.
5. Press the pause button until
is displayed above the
general control zone. The slider on the
left will show .
6. Place one finger on the top of the slider
on the left, until the following is
displayed.
7. Simultaneously press the control lock
button and the pause button for
a few seconds.
8. Hold the On/Off button pressed for
at least one second, to switch the device
on in demo mode.
This mode allows the appliance to
deactivate all heating elements,
while keeping the control panel
active.
When the demo mode is activated
and the device is switched on,
above the general control zone
will be displayed for a
few seconds and the sliders will
show .
Loading ...
Loading ...
Loading ...