Loading ...
Loading ...
Loading ...
Instructions for the User
7.6.2 Show Room Function
With the oven in OFF status (see point “7.2 Operating modes”) keep PT1
pressed until the message OFF SHO appears on DSP1. This means that
the SHOW ROOM function (which disables all the heating elements so
that only the control panel works) is not active.
Turn PT1 to the right or left to activate (ON SHO) or deactivate (OFF SHO)
this function. To use the oven normally, set OFF SHO.
After setting the parameter required, press PT2 to return the oven to the
initial standby status.
The appliance is equipped with a cooling
system which comes into operation as
soon as a cooking function starts.
Operation of the fans generates a normal
air flow which comes out above the door
and may continue for a short time even
after the oven is switched off.
The oven light comes on:
• when the oven door is opend in standby status (point “7.2 Operating
modes”) or
• when the function knob is turned to any function.
7.7 Cooling fan system
7.8 Inside light
41
Loading ...
Loading ...
Loading ...