Loading ...
Loading ...
Loading ...
8
7. Select WASH TEMP
Once you select a cycle, select the desired wash temperature
by turning the Wash Temp knob to the appropriate setting based
on your load. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
8. Press START to begin wash cycle
Press the Start button to start the wash cycle. When the
cycle has finished, the DONE indicator will light. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and avoid rusting of metal hooks, zippers,
and snaps.
Unlocking the lid to add garments or fabric softener
If you need to open a locked lid to add 1 or 2 missed garments
or add fabric softener:
Press START for 3 seconds; the Lid Locked Light will blink
and the lid will unlock once the washer movement has stopped.
This may take several minutes if the load was spinning at high
speed. Then close lid and press START again to restart the cycle.
Wash Temp Suggested Fabrics
Hot
Some cold water is added to save energy.
This will be cooler than your hot water
heater setting.
Whites and pastels
Durable garments
Heavy soils
Warm
Some cold water will be added, so this will
be cooler than what your previous washer
provided.
Bright colors
Moderate to light
soils
Cool
Warm water may be added to assist in soil
removal and to help dissolve detergents.
Colors that bleed
or fade
Light soils
Cold
This is the temperature from your faucet.
If your tap cold water is less than 50°F
(10°C), warm water may be added to
assist in soil removal and help dissolve
detergent.
Dark colors that
bleed or fade
Light soils
Loading ...
Loading ...
Loading ...