Loading ...
Loading ...
Loading ...
Your tires have wear indicators
molded into the tread. When the
tread wears down, you will see a
band 1/2 inch (12.7 mm) wide band
across the tread. This shows there is
less than 1/16 inch (1.6 mm) of tread
left on the tire.
A tire this worn gives very little
traction on wet roads. You should
replace the tire if you can see three
or more tread wear indicators.
Thecompactsparetirepressureis:
For convenience, the recommended
tire sizes and cold tire pressures are
on a label on the driver’s doorjamb.
For additional information about
your tires, see page .
Every time you check inflation, you
should also examine the tires for
damage, foreign objects, and wear.
Youshouldlookfor:
Bumps or bulges in the tread or
side of the tire. Replace the tire if
youfindeitheroftheseconditions.
Cuts, splits, or cracks in the side
of the tire. Replace the tire if you
can see fabric or cord.
Excessive tread wear.
We strongly recommend that you do
not drive faster than the posted
speed limits and conditions allow. If
you ever drive in a sanctioned
competitive event at sustained high
speeds (over 118 mph or 190 km/h),
be sure to adjust the cold tire
pressuresasshownbelow.Ifyoudo
not, excessive heat can build up and
cause sudden tire failure.
282
Front/Rear:
Tire Size Cold Tire Pressure
Optional Summer for Si
Si model only
Si model only
Tires
High Speed Driving
Tire Inspection
Tire Size·Cold Tire Pressure for
High Speed Driving
Maintenance
245
INDICATOR LOCATION MARKS
TREAD WEAR INDICATOR
32 psi (220 kPa , 2.2
kgf/cm
)
215/45ZR17 91W
60 psi (420 kPa , 4.2 kgf/cm )
P215/45R17 87V
35 psi (240 kPa , 2.4 kgf/cm )
Main Menu
Table of Contents
s
t
Main Menu
s
t
Main MenuMain Menu
s
t
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...